13.2 Basic Concepts

Musculoskeletal Anatomy, Physiology, and Assessment

Before discussing the concept of mobility, it is important to understand the anatomy of the musculoskeletal system, common musculoskeletal conditions, and the components of a musculoskeletal system assessment. Read more about these topics in the “Musculoskeletal Assessment” chapter in Open RN Nursing Skills.

Mobility and Immobility

Mobility is the ability of a patient to change and control their body position. Physical mobility requires sufficient muscle strength and energy, along with adequate skeletal stability, joint function, and neuromuscular synchronization. Anything that disrupts this integrated process can lead to impaired mobility or immobility.^[1] Mobility exists on a continuum ranging from no impairment (i.e., the patient can make major and frequent changes in position without assistance) to being completely immobile (i.e., the patient is unable to make even slight changes in body or extremity position without assistance). See Figure 13.1^[2] for an image of a patient with impaired physical mobility requiring assistance with a wheelchair.

Functional mobility is the ability of a person to move around in their environment, including walking, standing up from a chair, sitting down from standing, and moving around in bed. The three main areas of functional mobility are the following:

• Bed Mobility: The ability of a patient to move around in bed, including moving from lying to sitting and sitting to lying.
• Transferring: The action of a patient moving from one surface to another. This includes moving from a bed into a chair or moving from one chair to another.
• Ambulation: The ability to walk. This includes assistance from another person or an assistive device, such as a cane, walker, or crutches.

Immobility can be caused by several physical and psychological factors, including acute and chronic diseases, traumatic injuries, and chronic pain. Several neurological and musculoskeletal disorders can adversely affect mobility, including osteoarthritis, rheumatoid arthritis, muscular dystrophy, cerebral palsy, multiple sclerosis, and Parkinson’s disease. Traumatic injuries, such as skeletal fractures, head injuries, or spinal injuries, also impair mobility. Diseases that cause fatigue, such as heart failure, chronic obstructive pulmonary disease, and depression, or conditions that cause pain also affect the patient’s desire to move.

Effects of Immobility

Patients who spend an extended period of time in bed as they recover from surgery, injury, or illness can develop a variety of complications due to loss of muscle strength (estimated at a rate of 20% per week of immobility). Regardless of the cause, immobility can cause degradation of cardiovascular, respiratory, gastrointestinal, and musculoskeletal functioning. Promoting mobility can prevent these complications from occurring. Findings from a literature review demonstrated several benefits of mobilization, including less delirium, pain, urinary discomfort, urinary tract infection, fatigue, deep vein thrombosis (DVT), and pneumonia, as well as an improved ability to void. Mobilization also decreased depression, anxiety, and symptom distress, while enhancing comfort, satisfaction, quality of life, and independence.^[3] See Table 13.2a for a summary of the effects of immobility on these body systems.^[4],[5],[6] Decreased mobility is also a major risk factor for skin breakdown, as indicated on the Braden Scale. See Figure 13.2^[7] for an image of a patient with impaired mobility who developed a DVT.

Table 13.2a Effects of Immobility on Body Systems^[8]

Read additional information pertaining to the content in Table 13.2a using the hyperlinks in the following box.

Strategies to promote patient mobility can be divided into two categories: those used when the patient is in bed and those used when the patient is able to get out of bed. In-bed interventions to enhance mobility include performing repositioning activities, completing range of motion exercises, and assisting the patient to dangle on the edge of a bed. Out-of-bed interventions to enhance mobility include transferring the patient from bed to chair and assisting with ambulation.^[9] Unfortunately, ambulation of patients has been identified as the most frequently missed element of inpatient nursing care with rates as high as 76–88% of the time.^[10] Before discussing these interventions to promote mobility, let’s review the assessments that a nurse must perform prior to safely implementing mobilization interventions.

Assessing Mobility Status and the Need for Assistance

A patient’s mobility status and their need for assistance affect nursing care decisions, such as handling and transferring procedures, ambulation, and implementation of fall precautions. Initial mobility assessments are typically performed on admission to a facility by a physical therapist (PT). See Table 13.2b for an example of common types of assistance required.

Table 13.2b Common Types of Assistance Required^[11]

In addition to the amount of assistance required, physical therapists may determine a patient’s weight-bearing status. For example, patients with lower extremity fractures or those recovering from knee or hip replacement often progress through stages of weight-bearing activity. See Table 13.2c for common weight-bearing prescriptions.

Table 13.2c Weight-Bearing Prescriptions

In addition to reviewing orders regarding weight-bearing and assistance required, all staff should assess patient mobility before and during interventions, such as transferring from surface to surface or during ambulation. Staff may frequently rely on the patient’s or a family member’s report on the patient’s ability to stand, transfer, and ambulate, but this information can be unreliable. For example, the patient may have unrecognized physical deconditioning from the disease or injury that necessitated hospitalization, or they may have developed new cognitive impairments related to the admitting diagnosis or their current medications.^[12]

Several objective screening tests, such as the Timed Get Up and Go Test, have traditionally been used by nurses to assess a patient’s mobility status. The Timed Get Up and Go Test begins by having the patient stand up from an armchair, walk three yards, turn around, walk back to the chair, and sit down. As the patient performs these maneuvers, their posture, body alignment, balance, and gait are analyzed. However, this test and other tests do not provide guidance on what the nurse should do if the patient can’t maintain seated balance, bear weight, or stand and walk. The Banner Mobility Assessment Tool (BMAT) was developed to provide guidance regarding safe patient handling and mobility (SPHM). It is used as a nurse-driven bedside assessment of patient mobility and walks the patient through a four-step functional task list and identifies the mobility level the patient can achieve. It then provides guidance regarding the SPHM technology needed to safely lift, transfer, and mobilize the patient.^[13] Read additional information about the Banner Mobility Assessment Tool (BMAT) using the following hyperlink.

See the following box for an example of a nurse using the BMAT.

Safe Patient Handling

Assisting patients with decreased immobility poses an increased risk of injury to health care workers. A focus on safe patient handling and mobility (SPHM) in acute and long-term care over the past decade has resulted in decreased staff lifting injuries for the first time in 30 years. Nonetheless, nurses still suffer more musculoskeletal disorders from lifting than other employees in the manufacturing and construction industries. Many employers and nurses previously believed that lifting injuries could be prevented by using proper body mechanics, but evidence contradicts this assumption. Body mechanics involves the coordinated effort of muscles, bones, and one’s nervous system to maintain balance, posture, and alignment when moving, transferring, and positioning patients.^[16] The National Institute of Occupational Safety and Health (NIOSH) calculates maximum loads for lifting, pushing, pulling, and carrying for all types of employees. For example, a maximum load for employees lifting a box with handles is 50 pounds (23 kg), but this weight is decreased when the lifter has to reach, lift from near the floor, or assume a twisted or awkward position. Because patients don’t come in simple shapes and may sit or lie in awkward positions, move unexpectedly, or have wounds or devices that interfere with lifting, the safe lifting load for patients is less than this maximum 50 pound load. Although using proper body mechanics and good lifting techniques are important, they don’t prevent lifting injuries in these patient circumstances^{[17],[18],[19]} Factors that increase risk for lifting injuries in nurses are exertion, frequency, posture, and duration of exposure. Combinations of these factors, such as high exertion while in an awkward posture (for example, holding a patient’s leg while bent over and twisted), unpredictable patient movements, and extended reaching, intensify the risk.^[20]

In 2013 the American Nurses Association (ANA) published Safe Patient Handling and Mobility (SPHM) standards. See the standards in the following box. Learn more about safe patient handling using the following hyperlinks.

Assistive Devices

There are several types of assistive devices that a nurse may incorporate during safe patient handling and mobility. An assistive device is an object or piece of equipment designed to help a patient with activities of daily living, such as a walker, cane, gait belt, or mechanical lift.^[22] Assistive devices include other items described below.

Gait Belts

Gait belts should be used to ensure stability when assisting patients to stand, ambulate, or transfer from bed to chair. A gait belt is a 2-inch-wide (5 mm) belt, with or without handles, that is placed around a patient’s waist and fastened with a buckle. The gait belt should be applied on top of clothing or a gown to protect the patient’s skin. See Figure 13.3^[23] for an image of a gait belt.

Slider Boards

A slider board (also called a transfer board) is used to transfer an immobile patient from one surface to another while the patient is lying supine (e.g., from a stretcher to hospital bed).^[24] See Figure 13.4^[25] for an image of a patient being transferred by logrolling off a slider board with several assistants.

Sit to Stand Lifts

Sit to Stand Lifts (also referred to as Sara Lifts, Lift Ups, Stand Assist, or Stand Up Lifts) are mobility devices that assist weight-bearing patients who are unable to transition from a sitting position to a standing position using their own strength. They are used to safely transfer patients who have some muscular strength but not enough strength to safely change positions by themselves. Some sit to stand lifts use a mechanized lift whereas others are nonmechanized. See Figure 13.5^[26] for an image of a nurse assisting a patient to stand with a sit to stand lift.

Mechanical Lifts

A mechanical lift is a hydraulic lift with a sling used to move patients who cannot bear weight or have a medical condition that does not allow them to stand or assist with moving. It can be a portable device or permanently attached to the ceiling. See Figure 13.6^[27] for an image of a mechanical lift.

Most clinical agencies do not allow nursing students to operate mechanical lifts independently without the supervision of agency staff. Review agency policy and obtain assistance as indicated, even if you have experience using mechanical lifts as an employee at another agency.

Early Mobility Protocols

Many hospitals use nurse-driven mobility protocols to encourage early mobility of patients in intensive care units and after surgery. The purpose of early mobility protocols is to maintain the patient’s baseline mobility and functional capacity, decrease the incidence of delirium, and decrease hospital length of stay. Protocols include a coordinated approach by the multidisciplinary team and may include respiratory therapists, physical therapists, pharmacists, occupational therapists, and the health care provider who focus on getting the patient out of bed faster.^[28]

When early mobility protocols are in place, nurses use a screening tool to determine whether a patient is clinically ready to attempt the protocol. This algorithm begins by reviewing the patient’s neurological criteria, such as, does the patient open his or her eyes in response to verbal stimulation? If the patient meets neurological criteria, they are assessed against additional criteria for respiratory, circulatory, neurological, and other considerations. If the patient clears these criteria, a registered nurse may carefully initiate an early mobilization protocol in collaboration with a physical therapist. See Figure 13.7^[29] for an example of an early mobilization protocol used for patients in an ICU.^[30]

See the following box for an example of a mobilization protocol in an intermediate care unit.

Range of Motion Exercises

When patients are unable to ambulate or have injury to specific extremities, range of motion (ROM) exercises are often prescribed. ROM exercises facilitate movement of specific joints and promote mobility of the extremities. Because changes in joints can occur after three days of immobility, ROM exercises should be started as soon as possible. There are three types of ROM exercises: passive, active, and active assist. Passive range of motion is movement applied to a joint solely by another person or by a passive motion machine. When passive range of motion is applied, the joint of an individual receiving exercise is completely relaxed while the outside force moves the body part while they are lying in bed. For example, patients who undergo knee replacement surgery may be prescribed a passive motion machine that continuously flexes and extends the patient’s knee while lying in bed. See Figure 13.8^[32] for an image of a passive motion machine. Active range of motion is movement of a joint by the individual performing the exercise with no outside force aiding in the movement. Active assist range of motion is joint movement with partial assistance from an outside force. For example, during the recovery period after shoulder surgery, a patient attends physical therapy and receives 50% assistance in moving the arm with the help of a physical therapy assistant.

Patients may receive temporary ROM exercises due to injury, surgery, or other temporary conditions. These patients are expected to make a full recovery and over time will no longer need ROM to ensure the proper functioning of their joint. Other patients require long-term ROM exercises to prevent contractures that can occur in conditions such as spinal cord injury, stroke, neuromuscular diseases, or traumatic brain injury. A contracture is the lack of full passive range of motion due to joint, muscle, or soft tissue limitations.^[33] See Figure 13.9^[34] for an image of a severe leg contracture in a patient with a terminal neurological condition.

Range of motion exercises are prescribed by a physical therapist and can be performed by physical therapy assistants, nursing assistants, patient technicians, and nurses based on agency policy. Guidelines for performing range of motion exercises include the following:

• A program of passive stretching should be started as early as possible in the course of neuromuscular disease to prevent contractures and become part of a regular morning and evening routine.
• Proper technique is essential for passive stretching to be effective. With each stretch, the position should be held for a count of 15, and each exercise should be repeated 10 to 15 times during a session (or as prescribed). Stretching should be performed slowly and gently. An overly strenuous stretch may cause discomfort and reduce cooperation.
• Written instructional materials should be provided to the patient and family as a supplement to verbal instructions and demonstrations by the physical therapist.

Limb positioning with assistive devices can also be used to prevent contracture formation. The limb should be placed in a resting position that opposes or minimizes flexion.^[36] Positioning aids include pillows, foot boots, handrolls, hand-wrist splints, heel or elbow protectors, abduction pillows, or a trapeze bar. See Figure 13.10^[37] for an image of a brace used to prevent foot drop in a patient with multiple sclerosis. Foot drop is a complication of immobility that results in plantar flexion of the foot, interfering with the ability to complete weight bearing activities.

Read additional information about range of motion exercises, preventing contractures, and physical therapy using the following hyperlinks.

Repositioning Patients

Repositioning a bedridden patient maintains body alignment and prevents pressure injuries, foot drop, and contractures. Proper positioning also provides comfort for patients who have decreased mobility related to a medical condition or treatment. When repositioning a patient in bed, supportive devices such as pillows, rolls, and blankets can aid in providing comfort and safety. There are several potential positions that are determined based on the patient’s medical condition, preferences, or treatment related to an illness.^[38] It is important to reposition patients appropriately to prevent neurological injury that can occur if a patient is inadvertently placed on their arm.

Supine Position

In supine positioning, the patient lies flat on their back. Pillows or other devices may be used to prevent foot drop. Additional supportive devices, such as pillows under the arms, may be added for comfort. See Figure 13.11^[39] for an image of a patient in the supine position.^[40]

Prone Position

In prone positioning, the patient lies on their stomach with their head turned to the side.^[41] Pillows may be placed under the lower legs to align the feet. See Figure 13.12^[42] for an image of a patient in the prone position. Placing patients in the prone position may improve their oxygenation status in certain types of medical disorders, such as COVID-19.^[43]

Lateral Position

In lateral positioning, the patient lies on one side of their body with the top leg flexed over the bottom leg. This position helps relieve pressure on the coccyx.^[44] A pillow may be placed under the top arm for comfort. See Figure 13.13^[45] for an image of a patient in the lateral position. The lateral position is often used for pregnant women to prevent inferior vena cava compression and enhance blood flow to the fetus.

Sims Position

In Sims positioning, the patient is positioned halfway between the supine and prone positions with their legs flexed. A pillow is placed under the top leg. Their arms should be comfortably placed beside them, not underneath.^[46] See Figure 13.14^[47] for an image of a patient in Sims position. The Sims position is used during some procedures, such as the administration of an enema.

Fowler’s Position

In Fowler’s positioning, the head of bed is placed at a 45- to 90-degree angle. The bed can be positioned to slightly flex the hips to help prevent the patient from migrating downwards in bed.^[48]  See Figure 13.15^[49] for an image of a patient in Fowler’s position. High Fowler’s position refers to the bed being at a 90-degree angle. The Fowler’s position is used to promote lung expansion and improve a patient’s oxygenation. It is also used to prevent aspiration in patients while eating or receiving tube feeding.

Semi-Fowler’s Position

In Semi-Fowler’s positioning, the head of bed is placed at a 30- to 45-degree angle. The patient’s hips may or may not be flexed. See Figure 13.16^[50] for an image of a patient in Semi-Fowler’s position. Semi-Fowler’s position is used for the same purposes as Fowler’s position but is generally better tolerated over long periods of time.

Trendelenburg Position

In Trendelenburg positioning, the head of the bed is placed lower than the patient’s feet. This position may be used in certain situations to promote venous return to the head and heart, such as during severe hypotension and medical emergencies.^[51] See Figure 13.17^[52] for an image of Trendelenburg position.

Tripod Position

Patients who are feeling short of breath often naturally assume the tripod position. In the tripod position, the patient leans forward while sitting with their elbows on their knees or resting on a table. Patients experiencing breathing difficulties can be placed in this position to enhance lung expansion and air exchange. See Figure 13.18^[53] for images of an individual demonstrating breathing difficulty who has assumed the tripod position.

Moving a Patient Up in Bed

When moving a patient up in bed, first determine the level of assistance needed to provide optimal patient care. It is vital to prevent friction and shear when moving a patient up in bed to prevent pressure injuries. If a patient is unable to assist with repositioning in bed, follow agency policy regarding using lifting devices and mechanical lifts. If the patient is able to assist with repositioning and minimal lifting by staff is required, use the following guidelines with assistance from another health care professional to help with the move and prevent injury.^[54] See Figure 13.19^[55] for an image of moving a patient up in bed.

• Explain to the patient what will happen and how the patient can help.
• Raise the bed to a safe working height and ensure that the brakes are applied.
• Position the patient in the supine position with the bed flat. Place a pillow at the head of the bed and against the headboard to prevent accidentally bumping the patient’s head on the headboard.
• Two health care professionals should stand with feet shoulder width apart between the shoulders and hips of the patient at the bedside. This keeps the heaviest part of the patient closest to the center of gravity of the health care providers. Weight will be shifted from back foot to front foot.
• Fan-fold the draw sheet toward the patient with palms facing up. This provides a strong grip to move the patient up with the draw sheet.
• Ask the patient to tilt their head toward their chest, fold arms across their chest, and bend their knees to assist with the movement. Let the patient know when the move will happen. This step prevents injury from occurring to the patient and prepares them for the move.
• Tighten your gluteal and abdominal muscles, bend your knees, and keep your back straight and neutral. Face the direction of movement. Proper body mechanics can help prevent back injury when used in appropriate patient care situations.
• On the count of three by the lead person, gently slide (not lift) the patient up the bed, shifting your weight from the back foot to the front, keeping your back straight and knees slightly bent.
• Replace the pillow under the patient’s head, reposition the patient in the bed, and cover them with a sheet or blanket to provide comfort.
• Lower the bed, raise the side rails as indicated, and ensure the call light is within reach. Perform hand hygiene.^[56]

Assisting Patients to Seated Position

Prior to ambulating, repositioning, or transferring a patient from one surface to another (e.g., a bed to a wheelchair), it often necessary to move the patient to the side of the bed to avoid straining or excessive reaching by the health care professional. Positioning the patient to the side of the bed also allows the health care provider to have the patient as close as possible to their center of gravity for optimal balance during patient handling.^[57]

Patients who have been lying in bed may experience vertigo, a sensation of dizziness as if the room is spinning, or orthostatic hypotension, low blood pressure that occurs when a patient changes position from lying to sitting or sitting to standing and causes the patient to feel dizzy, faint, or light-headed. Orthostatic hypotension is defined as a drop in systolic blood pressure of 20 mm Hg or more or a drop of diastolic blood pressure of 10 mm Hg or more within 3 minutes of sitting or standing. For this reason, always begin a transfer or ambulation process by sitting the patient on the side of the bed for a few minutes with their legs dangling.^[58]

Begin by explaining to the patient what will happen and how they can help. Determine if additional assistance or a mechanical lift is needed.^[59] Ensure the bed is in a low and locked position, and then use the following guidelines to assist a patient to the seated position on the edge of the bed.^[60] See Figure 13.20^[61] for images of a nurse assisting a patient to a seated position.

• Stand facing the head of the bed at a 45-degree angle with your feet apart, with one foot in front of the other. Stand next to the waist of the patient.
• Ask the patient to turn onto their side, facing you, as they move closer to the edge of the bed.
• Place one hand behind the patient’s shoulders, supporting the neck and vertebrae.
• On the count of three, instruct the patient to use their elbows to push up against the bed and then grasp the side rail as you support their shoulders as they sit. Shift your weight from the front foot to the back foot as you assist them to sit. Do not allow the patient to place their arms around your shoulders because this can lead to serious back injuries.
• As you shift your weight, gently grasp the patient’s outer thighs with your other hand and help them slide their feet off the bed to dangle or touch the floor. This step helps the patient sit and move their legs off the bed at the same time. As you perform this action, bend your knees and keep your back straight and neutral.
• Assess the patient for symptoms of orthostatic hypotension or vertigo. If they are experiencing any dizziness, request them to sit and dangle on the edge of the bed and determine if the symptoms resolve before transferring or ambulating.^[62]

Ambulating a Patient

Ambulation is the ability of a patient to safely walk independently, with assistance from another person, or with an assistive device, such as a cane, walker, or crutches. After a patient has been assessed and determined safe to ambulate, determine if assistive devices or the assistance of a second staff member is required. Assist the patient to sit on the side of the bed and assess for symptoms of vertigo or orthostatic hypotension before proceeding. Ensure the patient is wearing proper footwear, such as shoes or nonslip socks. Apply a gait belt snugly over their clothing and around their waist if any type of assistance is required. See Figure 13.21^[63] for an image of applying a gait belt. The patient should be cooperative, able to bear weight on their own, have good trunk control, and be able to transition to a standing position on their own. If these criteria are not met, then mechanical devices, such as a sit to stand lift, should be used to assist a weight-bearing patient from a sitting position to a standing position. If a patient uses a walker or cane, these assistive devices should be placed near the bed before beginning this procedure.

Stand in front of the patient, with your legs on the outside of their legs. Grasp each side of the gait belt, while keeping your back straight and knees bent, and then rock your weight backwards while gently steadying the patient into a standing position. After the patient is standing and feels stable, move to their unaffected side and grasp the gait belt in the middle of their back.^[64] If needed for stability, place one arm under the patient’s arm, gently grasp their forearm, and lock your arm firmly under the patient’s axilla. In this position, if the patient starts to fall, you can provide support at the patient’s shoulder.^[65] If the patient uses a walker or cane, ensure the patient is using this device before beginning ambulation. See Figure 13.22^[66] for an image of a nurse assisting the patient to stand.

Before stepping away from the bed, ask the patient if they feel dizzy or light-headed. If they do, sit the patient back down on the bed until the symptoms resolve. If the patient feels stable, begin walking by matching your steps to the patient’s. Instruct the patient to look ahead and lift each foot off the ground. Walk only as far as the patient can tolerate without feeling dizzy or weak. Periodically ask them how they are feeling to check for dizziness or weakness.^[67] In some situations of early ambulation, it is helpful for a second staff member to follow behind the patient with a wheeled walker or wheelchair in case the patient needs to sit while walking.

To assist the patient back into the bed or a chair, have them stand with the back of their knees touching the bed or chair. Grasp the gait belt and assist them as they lower into a sitting position, keeping your back straight and knees bent. Remove the gait belt. If the patient is returning to bed, place the bed in the lowest position, raise the side rails as indicated, and ensure the call light is within reach. Cover the patient with a sheet or blanket to provide comfort. Document the length of ambulation and the patient’s tolerance of ambulation.

Transfer From Bed to Chair or Wheelchair

Patients often require assistance when moving from a bed to a chair or wheelchair. A patient must be cooperative and predictable, able to bear weight on both legs, and able to take small steps and pivot to safely transfer with a one-person assist. If any of these criteria are not met, a two-person transfer or mechanical lift is recommended. Always complete a mobility assessment and check the provider’s or physical therapist’s orders prior to transferring patients.^[68]

Begin by explaining to the patient what will happen during the transfer and how they can help. Be sure proper footwear is in place. Lower the bed; set it at a 45-degree angle. Place the wheelchair next to the bed and apply the wheelchair brakes. If the patient has weakness on one side, place the wheelchair on their strong side.^[69]

Assist the patient to a seated position on the side of the bed with their feet on the floor. (See the previous section on how to assist a patient to a seated position.) Apply the gait belt snugly around their waist. Place your legs on the outside of their legs. Ask them to place their hands on your waist as they raise themselves into a standing position. Do not lift the patient. If additional assistance is required, obtain a mechanical lift, such as a sit to stand device. Do not allow them to put their arms around your neck because this can cause back injury. Stay close to the  patient during the transfer to keep the patient’s weight close to your center of gravity. Once standing, ask the patient to pivot and then take a few steps back until they can feel the wheelchair on the back of their legs. Have the patient grasp the arm of the wheelchair and lean forward slightly. Assist the patient to lower themselves, while shifting your weight from your back leg to the front leg with your knees bent, trunk straight, and elbows slightly bent. Allow the patient to slowly lower themselves into the wheelchair using the armrests for support.

See Figure 13.23^[70]for an image of a staff member assisting a patient to a wheelchair.

Reflective Question: What could be improved during this transfer?

Lowering A Patient to the Floor

A patient may begin to fall while ambulating or while being transferred from one surface to another. If a patient begins to fall from a standing position, do not attempt to stop the fall or catch the patient because this can cause back injury. Instead, try to control their fall by lowering them to the floor.^[72]

If a patient starts to fall and you are close by, move behind the patient and take one step back. Support the patient around the waist or hip area or grab the gait belt. Bend one leg and place it between the patient’s legs. Slowly slide the patient down your leg, lowering yourself to the floor at the same time. Always protect their head first. Once the patient is on the floor, assess the patient for injuries prior to moving them. Assess the patient’s need for assistance to get off the floor. If the patient is unable to get up off the floor, use a mechanical lift. Complete an incident report and follow up according to the patient’s condition and agency policy. See Figure 13.24^[73] for images of lowering a patient to the floor.

Preventing Falls

Falls are a major safety concern in health care. Nurses are responsible for identifying, managing, and eliminating potential fall hazards for patients. All patient-handling activities (positioning, transfers, and ambulation) pose a risk to both patients and health care professionals. Older adults are often at increased risk for falls due to impaired mental status, decreased strength, impaired balance and mobility, and decreased sensory perception. Patients may also be at risk for falls due to gait problems, cognitive ability, visual problems, urinary frequency, generalized weakness, cognitive impairments, or medications that may cause hypotension or drowsiness.^[74] Falls can cause head injuries, fractures, lacerations, and other injuries.

Fall prevention is key. If a patient begins to feel dizzy while ambulating or transferring, assist them to sit on a chair or on the floor to avoid a fall. The head is the most important part of the body, so protect it as much as possible. In the event of a fall, seek help and stay with the patient until assistance arrives. Follow agency policy for reporting, assessing, and documenting. After a fall, always assess a patient for injuries prior to moving them. If the patient remains weak or dizzy, do not attempt to ambulate them, but instead, ask for assistance to transfer them to a chair or bed.^[75]

All patients should be assessed for risk factors for falls and necessary fall precautions implemented per agency policy. Read more information about preventing falls in the “Safety” chapter.